Press n or j to go to the next uncovered block, b, p or k for the previous block.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 | /** * Defines the calibration types available. These define how the units * for measurements are specified. */ export enum CalibrationTypes { /** * Not applicable means the units are directly defind by the underlying * hardware, such as CT and MR volumetric displays, so no special handling * or notification is required. */ NOT_APPLICABLE = '', /** * ERMF is estimated radiographic magnification factor. This defines how * much the image is magnified at the detector as opposed to the location in * the body of interest. This occurs because the radiation beam is expanding * and effectively magnifies the image on the detector compared to where the * point of interest in the body is. * This suggests that measurements can be partially trusted, but the user * still needs to be aware that different depths within the body have differing * ERMF values, so precise measurements would still need to be manually calibrated. */ ERMF = 'ERMF', /** * User calibration means that the user has provided a custom calibration * specifying how large the image data is. This type can occur on * volumetric images, eg for scout images that might have invalid spacing * tags. */ USER = 'User', /** * A projection calibration means the raw detector size, without any * ERMF applied, meaning that the size in the body cannot be trusted and * that a calibration should be applied. * This is different from Error in that there is simply no magnification * factor applied as opposed to having multiple, inconsistent magnification * factors. */ PROJECTION = 'Proj', /** * A region calibration is used for other types of images, typically * ultrasouunds where the distance in the image may mean something other than * physical distance, such as mV or Hz or some other measurement values. */ REGION = 'Region', /** * Error is used to define mismatches between various units, such as when * there are two different ERMF values specified. This is an indication to * NOT trust the measurement values but to manually calibrate. */ ERROR = 'Error', /** Uncalibrated image */ UNCALIBRATED = 'Uncalibrated', } export default CalibrationTypes; |